In Luo Jia’s magical brain like a hard drive, the robot blueprints are ready-made and can be used directly.
The main difficulty lies in the compatibility of parts. After all, the parts used in the design of extraterrestrial civilizations and the parts that Luo Jia can buy from the earth must have a huge difference in shape and power.
The key is to learn the design ideas of extraterrestrial civilizations, and the height of thinking will determine the height of the product.
In this regard, Luo Jia undoubtedly has a huge advantage. Even if all the robot experts in the world are combined, they are far inferior to the folders in Luo Jia’s head.
As for the parts, it’s all tears.
The most important components of the robot are the harmonic geared motor and the RV geared motor.
Harmonic motors have low power and are used to drive small devices such as eyes and knuckles.
The RV motor has strong horsepower and drives large equipment such as robots.
At present, the main players of these two types of motors in the world are companies from Neon Country.
There is a spinea company in Germany. The quality of the RV motors produced is good, but the sales volume has been so-so, and it can’t compete with the neon counterparts.
Neon Kingdom Teijin, Harmonaco, Sumitomo and other giant companies have almost completely monopolized the reducer market.
There are more than 200 domestic reducer manufacturers, and the more powerful companies include Lvde, Laifu, Benrun, Han’s, Xintuo, Kangzhen, Qinchuan, Shuanghuan, Hengfengtai, Zhongdida etc.
But it is very disappointing that these domestic manufacturers all imitate the design of the Neon company, heat generation, noise, and service life. In these important technical indicators, they are far behind the giants of the Neon country.
So Luo Jia has no choice at all. The harmonic deceleration can only use Harmonaco, and the RV deceleration can only use Teijin. As for other parts, there are basically no domestic products.
I have to say that in the high-precision machinery industry, our country has a long way to go. The precision of the Teijin reducer can even reach the micron level, and its strength is quite terrifying.
When Luo Jia was preparing to enter the robotics industry, he spent a lot of time doing pre-research, and most of the blueprints were completed.
He now spends another night to finalize the plan, and then asks Li Moran to take him to the local high-precision processing factory in Wuxi.
Wuxi is a base city for the electromechanical industry. There are many factories in this area, but most of them do not meet Luo Jia’s requirements. In order to ensure quality, Luo Jia’s requirements are very strict.
Finally they found a company called Taidong Precision.
The owner of the factory is an uncle in his fifties named Pang Yunhai. He was born as a mechanical engineer in a state-owned enterprise. He went into business twenty years ago, specializing in the processing of precision parts.
Pang Yunhai excitedly led Luo Jia and Li Moran to two huge five-axis CNC machining centers, “You must have never seen this before, right? DMG CTX2000 and DMG CTX4000, giant The forced German goods cost about 18 million with the complete tool magazine.”
“In Wuxi, I want to say that I am ranked second, and no one dares to say that I am ranked first. No matter how complicated parts you want, I can make them for you, but the price is not cheap. After all, I This is a high-end German product.”
Luo Jia shrugged, “The precision of DMG’s CNC machining center is top-notch, but their largest shareholder is Neon Country Mori Seiki, and they have always cooperated with Neon Country in terms of technology.”
Pang Yunhai didn’t expect that Luo Jia, who looked very young and had a background in computer science, knew mechanics?
Demagi’s major shareholder is indeed Neon Country. Pang Yunhai has often boasted to people that his machine tools are pure German products. Only Luo Jia knows that these two machine tools are actually a mixture of Germany and Neon Country.
Luo Jia went on to say, “Although I have no feelings for Neon Country, Germany has actually lagged behind Neon in the field of high-precision CNC machine tools. Even the non-standard machine tools made in Switzerland are more accurate than German ones.” Higher.”
“The American man-made F22 uses Neon SNK five-axis dragon boring and milling. Boeing’s main supplier is Yamazaki Mazak. The most accurate parent machine in the field of ultra-precision machining in the world is JTEKT. The precision of the lens is eight times higher than that of the three major military artifacts.”
“In addition, there are Amada, Danuo, Makino, Komatsu, Aida, Mitsubishi, Sodick, Citizen, Fujikoshi, Fuji, Toshiba, Brothers, Tsugami, Ryuzawa, Enzhou, Okamoto, Miya No, Husco, Sugino, Nakamura Ru, Mitsui Seiki, Toyowa, Matsuura, Takamatsu, Fanuc, Ikegai, etc. are some of the giants in the machine tool field.”
“Such a strong lineup is not only incomparable to our country, but even the Germans must be amazed. It is also a latecomer country in East Asia. The Neon Country is really far ahead of us in the field of machinery. I don’t know how to do it. How many years will it take to catch up.”
What Luo Jia said was very objective, and it was completely out of feeling.
Blind arrogance is stupid. When you want to enter an industry, you must first have a clear understanding of the current status of the industry and know where the gap is, so that you can try your best to shorten the gap.
Luo Jia did a lot of research in this area in a short amount of time.
After listening to Luo Jia’s words, Pang Yunhai was very emotional. Most people of his age are very patriotic. The list of unattainable giant companies made Pang Yunhai a little desperate.
“Don’t be too pessimistic, the road has to be taken step by step. The Neon Country is very strong in the mechanical field, but the development of our country in the IT field is not bad. We all use mobile phones to pay now, and the Neon Country is still there. In cash.” Luo Jia said.
The old and the young chatted very well, of course Luo Jia would not tell Pang Yunhai that he wanted to build a robot~Soverse.com~ only said that he wanted to produce a mechanical arm.
Pang Yunhai patted his chest and promised to mill out the best parts for Luo Jia, and find the most experienced engineer in the factory to work on Luo Jia’s order.
Stepping out of Taidong Precision’s gate, Li Moran felt that Luo Jia had taught him a lesson again.
The devil knows how much industry research Luo Jia has done behind his back. He is more confident now. It seems that Luo Jia chose this time to enter the robot industry and has made full preparations.
Luo Jia’s learning speed is too fast, and Li Moran secretly made up his mind to make up the mechanical course when he went back. In front of this terrifying boss, if he doesn’t study for a day, he will fall behind.
After returning home, Luo Jia passed the order drawings to Pang Yunhai. The humanoid robots were too dazzling to manufacture too many. Luo Jia planned to make a hundred sets first.
However, the spare parts cannot be prepared according to 100 sets, and some spare parts must be set aside, so Luo Jia ordered 120 sets.
There is still a lot of other work to be prepared. The reducer needs to be ordered from Teijin and Harmonaco dealers. In addition, Luo Jia is still preparing a high-power wireless charging system to solve the problem of robot energy consumption.
With the help of Li Moran, Hong Tao, and other colleagues in the company, Luo Jia spent two days to complete the procedures and purchases, and then sent Li Moran and his colleagues back to Shanghai to prepare for the establishment of the mechanical department.
This time, Dean Sha Zhan and Gu Pengdong will come forward to ask Fudan or Jiaotong University for some top talents in the Department of Mechanical Engineering.
Hong Tao stayed at the factory with two colleagues from the administrative department to receive the purchase orders and at the same time find someone to overhaul the equipment in the factory, ready to start work at any time.
After making these arrangements, Luo Jia took the high-speed train directly from Wuxi to go home, and was going to have a good talk with Comrade Luo Ning and let him manage the factory.